‘Spinning’ Posts
What is Yarn Count & How It is calculated
Count is very important factor for the Textile Yarn Manufacturing. Maintaining the yarn count is mandatory to retain the quality of a yarn and fabrics. Now read the basic things about yarn count at below: Definition of Count: According to the Textile Institute “Count is a number of indicating the mass per unit length or [...]
What Type of Textile Chemist Is Required For A Textile Industry?
Some works in a textile industry at washing plant, dyeing floor, and wet processing can not be properly done in case of absence of a Textile Chemist. The main act is usually be carried out by the textile chemist and except him or her none can accomplish it. A textile chemist must have proper & [...]
Action in Blow room | How to blow-room works in Textile Spinning?
There is some action which is carried out on blow room section of textile spinning manufacturing section. 1. Action of opposite strike: The actions of opposite spike opened the cotton fibre. By this action the large pieces of cotton have been reduced in size. 2. Action of air current: During processing, the movement of cotton [...]
Fibres Mixing & Blending Procedures for Textile Spinning blowroom section
What is Mixing in Spinning Blowroom: If different grade of same fibres are kept together, then it is called mixing. Types of Mixing: 1. volume mixing 2. weight mixing 3. hand stock mixing 4. bin mixing 5. mixing by hopper 6. lap mixing 7. card mixing 8. sliver mixing Blending: When different fibres of same [...]
